Configuring inbound emails

OpenProject is able to receive incoming emails and create and update work packages and reply in forums depending on the content of the email. If you’re using the Enterprise cloud you can skip the Setup section, as the settings are already configured.


Receiving emails is done via a rake task that fetches emails from an email server, parses them and performs actions depending on the content of the email. This rake task can be executed manually or automatically, e.g. with the help of a Cron job.

The rake task redmine:email:receive_imap fetches emails via IMAP and parses them.

Packaged installation


openproject run bundle exec rake redmine:email:receive_imap host='' username='test_user' password='password' port=993 ssl=true ssl_verification=true allow_override=type,project project=test_project


openproject run bundle exec rake redmine:email:receive_gmail credentials='/path/to/credentials.json' user_id='test_user' query='is:unread label:openproject' allow_override=type,project

Docker installation

The docker installation has a “cron-like” daemon that will imitate the above cron job. You need to specify the following ENV variables (e.g., to your env list file)

  • IMAP_SSL set to true or false depending on whether the ActionMailer IMAP connection requires implicit TLS/SSL (defaults to true)
  • IMAP_SSL_VERIFICATION set to true or false depending on whether the SSL certificate should be verified (defaults to true)
  • IMAP_PORT IMAP_HOST set to the IMAP host and port of your connection

Optional ENV variables:

  • IMAP_CHECK_INTERVAL=600 Interval in seconds to check for new mails (defaults to 10minutes)
  • IMAP_ALLOW_OVERRIDE Attributes writable (true for all), comma-separated list as specified in allow_override configuration.

Available arguments for this rake task that specify the email behavior are

key Docker ENV variable description
host IMAP_HOST address of the email server
username IMAP_USERNAME the name of the user that is used to connect to the email server
password IMAP_PASSWORD the password of the user
port IMAP_PORT the port that is used to connect to the email server
ssl IMAP_SSL and ``IMAP_SSL_VERIFICATION` specifies if SSL should be used when connecting to the email server
folder IMAP_FOLDER the folder to fetch emails from (default: INBOX)
move_on_success IMAP_MOVE_ON_SUCCESS the folder emails that were successfully parsed are moved to (instead of deleted, example: INBOX.success)
move_on_failure IMAP_MOVE_ON_FAILURE the folder emails that were ignored are moved to (example: INBOX.failed)

Available arguments that change how the work packages are handled:

key Docker ENV variable description
project IMAP_ATTR_PROJECT identifier of the target project
category IMAP_ATTR_CATEGORY name of the target category
priority IMAP_ATTR_PRIORITY name of the target priority
status IMAP_ATTR_STATUS name of the target status
version IMAP_ATTR_VERSION name of the target version
type IMAP_ATTR_TYPE name of the target type
assigned_to IMAP_ATTR_ASSIGNED_TO name of the assigned user
unknown_user IMAP_UNKNOWN_USER ignore: email is ignored (default), accept: accept as anonymous user, create: create a user account
allow_override IMAP_ALLOW_OVERRIDE specifies which attributes may be overwritten though specified by previous options. Comma separated list

Gmail API

In order to use the more secure Gmail API method, some extra initial setup in google cloud is required.

  1. Go to
  2. Create new project
  3. Navigate to Enable APIs and Services
  4. Enable the Gmail API
  5. Navigate to the “Credentials” page for the project
  6. Click “Create Credentials” > “Service Account”
  7. Give the service account editor permissions and click “Done”
  8. Click on the new service account, go to the “Keys” tab, and add a new key.
  9. Save the JSON key file Note: Do not give anyone access to this JSON file as it contains the private key to your service account!
  10. Go to
  11. Select Security > Access and Data Control > API Controls
  12. Go to “Domain-Wide Delegation”
  13. Add new API Client
  14. Open JSON key file and copy “client_id” number
  15. Enter into the scopes Note: Modify permissions are necessary here to mark emails as read This is so the service account can access all accounts in your Domain

Available arguments for the Gmail API rake task that specify the email behavior are

key description
credentials Gmail service account credentials file (JSON)
username Gmail email address
query Gmail search query (
read_on_failure Mark emails as read even on failure (default: true)
max_emails Max emails to process (default: 1000)

Format of the emails

Please note: It’s important to use the plain text editor of your email client (instead of the HTML editor) to avoid misinterpretations (e.g. for the project name).

Work packages

Let’s start with two examples right away to get you started. You can learn more about the details below.

Work package update

When you receive a work package notification you can simply reply to that email and it will be added as a comment to the work package. You can also update attributes.

For instance with the following reply.

status: closed

The issue is sorted then. Closing this.

This will add the comment and close the work package.

Work package closed via email

Work package creation

You can also create new work packages via email. Make sure to send your email to the same address you would use when replying to a work package notification.

When creating a work package, the project it will be created in will either be pre-defined via configuration (see below) or you will have to define it at the start of the email. You can also define its other attributes there.

For example if you write an email with the subject “Fixing problems” and the following body:

project: demo-project
type: Task
status: In Progress

I'm looking into the problems.

It will create a new work package in the Demo Project of type task which is in progress. demo-project is the project’s identifier which you can see either in the project settings or simply by looking at the address bar in your browser when you are in the project.

Work package created via email

Sending user address

The address the mail is sent from must match an existing account in order to map the user action. If a matching account is found, the mail handler impersonates the user to create the ticket.

If no matching account is found, the mail is rejected. To override this behavior and allow unknown mail address to create work packages, set the option no_permission_check=1 and specify with unknown_user=accept

Note: This feature only provides a mapping of mail to user account, it does not authenticate the user based on the mail. Since you can easily spoof mail addresses, you should not rely on the authenticity of work packages created that way. At the moment in the OpenProject Enterprise cloud work package generation by emails can only be triggered by registered email addresses.

Users with mail suffixes

If you’re used to using mail accounts with suffix support such as Google Mail, where you can specify, you will receive mails to that account but respond with your regular account . To mitigate this, OpenProject by default will expand searching for mail addresses account@domain to accounts account+suffix@domain through regex searching the mail column. If you do not wish that behavior or want to customize the prefix, alter the setting mail_suffix_separators by running bundle exec rails runner "Setting.mail_suffix_separators = ''"


The Attributes you can use in your email are the same whether you create or update a work package.

Only the project attribute is a bit special:

You must either add project to the set of allowed overridden attributes with allow_override=project,.. in order to use it in a mail, OR set it as fixed variable with project=identifier.

The subject of the work package that shall be created is derived from the subject of the email. The body of the email gets parsed and all lines that contain recognized keys are removed. What is left will become the description.

Other available keys for the email are:

Key Description Example
Project sets the project. Use the project identifier Project:test_project
Assignee sets the assignee. Use the email or login of the user
Type sets the type type:Milestone
Version sets the version version:v4.1.0
Start date sets the start date start date:2015-02-28
Due date sets the finish date
Estimated hours sets the estimated hours. Use a number Estimated hours:10.5
Remaining hours sets the remaining hours. Use a number Remaining hours:2.5
Status sets the status Status:closed
priority sets the priority priority:High

If you want to set a custom field just use the name as it is displayed in your browser, e.g. Custom field:new value

Notice: The keys are not case-sensitive but the values you want to set are.


If you create or update a work package via email the attachments of the email will be attached to the relevant work package.


If you create a work package via email and sent it to another email (to or bcc) OpenProject will search for a user with this email and add it as watcher.

Truncate Emails

In the administrator’s setting you can specify lines after which an email will not be parsed anymore. That is useful if you want to reply to an email automatically sent to you from OpenProject. E.g. you could set it to --Truncate here-- and insert this line into your email below the updates you want to perform.

Error handling

In case of receiving errors, the application will try to send an email to the user with some error details. This mail will only be sent if:

  • The incoming mail has been read by the application. If the setup above fails to read the email at all, this will obviously not be able to respond anything

  • The user is active on the system (Note that this happens on unknown_user=create as well)

  • The configuration setting report_incoming_email_errors is true (which it is by default)

By returning an email with error details, you can theoretically be leaking information through the error messages. As from addresses can be spoofed, please be aware of this issue and try to reduce the impact by setting up the integration appropriately.

If you’d like to disable the reporting of errors to the sender, please set report_incoming_email_errors=false:

  • In a packaged installation, run openproject config:set OPENPROJECT_REPORT__INCOMING__EMAIL__ERRORS=false and restart the openproject service.
  • In a docker system, add the ENV OPENPROJECT_REPORT__INCOMING__EMAIL__ERRORS=false